Skip to content

Rotary axes

CNC 4th Axis Rotary Table 80/140/170/200/250/320/400, Indexing Head for Machining Centers

$154¥1,027 observed on the listing, 27 October 2026. Not a quote.

Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.

What this CNC 4th axis rotary table listing says

Seven size codes (80, 140, 170, 200, 250, 320 and 400) are packed into this CNC fourth-axis rotary table listing, and the title runs them together, so the real size list needs confirming. The title calls it an indexing head for machining centres without saying whether the numbers refer to table diameter, chuck size or housing width, or whether a servo motor and driver are included. Gear type, reduction ratio and accuracy are not stated. The observed listing price is about US$154.03 (CNY 1,027.10), which suggests it belongs to the smallest size.

TypeCNC 4th axis rotary table, indexing head
Size codes80, 140, 170, 200, 250, 320, 400
MachinesCNC machining centres
AxisFourth axis

Questions for the seller before you buy a machine

  • Do the numbers 80 to 400 mean table diameter in millimetres, and which size is the observed price for?
  • What is the price of each size, and which motor and drive does each include?
  • Which gear mechanism does it use (worm, cam or harmonic), and what indexing accuracy and backlash do you state?
  • What are the centre height, maximum load and repeatability, and does a tailstock come with the table?

What this listing is good for

Works for a machining shop or machine builder who wants to test a fourth axis on a machining centre and will order one size before a lot. It is a poor match for a buyer who must fix the size first, since the title does not tie a size to a price.

What the listed price adds up to

This multiplies the listed price for the listed configuration. Options such as spindle power, controller or rails change the price and are confirmed first.

QuantityGoods at $154 eachIn yuan
1$154¥1,027
3$462¥3,081
5$770¥5,136

Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.

How this price compares with other rotary axes listings

This $154 listing ranks 2nd cheapest among 13 comparable ones, which run $86.76 to $6,813 (median $240). Before comparing machine prices, check that the travel, spindle and controller in each listing actually match.

Two checks that matter for CNC rotary axis orders

Decide between manual and motor-driven

Hand-crank units divide angles by turning a handle and a dividing plate, and do not connect to a controller. A CNC fourth axis has a motor and needs a driver and a controller axis. Ask which type the listing is, whether the motor and driver are included, and whether the unit will rotate while a program runs.

Plan weight, freight and mounting before buying

Rotary tables and dividing heads are dense cast or steel units that can weigh more than expected, and the five-axis and cam roller types carry a high unit value. Ask for packed weight and dimensions, and plan crating. Also confirm mounting hole patterns, T-slot size and cable connectors against your machine.

All rotary axes checks and listings

Buying this item: common questions

Is a 4th axis rotary table the same as an indexing head?

Not exactly. The manual type divides the circle into set steps, often by hand crank, while a 4th axis rotary table is driven by a motor and moves under program control. Several listings use both terms together, so ask whether the unit has a motor, what drives it, and whether it takes commands from your controller.

Can I buy this machine at the listed price?

Not as listed. The figure is the seller's price on 27 October 2026 at ¥6.668 to the dollar for the configuration in the listing. We confirm what is in the box, the voltage and the crate, then quote the delivered cost.

Is there a minimum order for the CNC 4th axis rotary table?

Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.

Want the CNC 4th axis rotary table delivered? Tell us the configuration, quantity and destination and we quote it line by line, crate and freight included.

Price this landed

Wholesale desktop CNC machines from China covers how small orders work. Is your workshop in Europe (EU) or United States? See the guides for wholesale desktop CNC machines for Europe (EU) and wholesale desktop CNC machines for United States. Taken from the Taobao listing on 27 October 2026; configurations change often. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.