Illustrative render
Spindles
Changsheng Square Air-Cooled High-Speed Spindle Motor 1.5/2.2/3.5/4.5/6.0/7.5KW
$112¥745 observed on the listing, 27 October 2026. Not a quote.
We confirm the exact configuration, voltage and what is included with the seller before ordering. Single units and trial orders are fine.
What this square air-cooled spindle motor listing says
Six ratings from 1.5KW to 7.5KW are offered for this square-body, air-cooled high-speed spindle, sold for engraving machines under the seller's Changsheng brand claim. A square housing is typically clamped against a flat plate, unlike round spindles held by a split ring clamp, so the machine's mount must match. The title does not state voltage, speed, collet size or the cooling fan details, and the observed US$111.79 (CNY 745.44) probably refers to only one rating. Larger ratings in air-cooled form are usually loud and heavy.
| Type | Square-body high-speed engraving spindle |
|---|---|
| Cooling | Air-cooled |
| Power options | 1.5KW, 2.2KW, 3.5KW, 4.5KW, 6.0KW, 7.5KW |
| Brand named | Changsheng (seller claim) |
Questions for the seller before you buy a machine
- What are the square housing's outside dimensions and the mounting hole pattern for each power rating, so we can check them against a mounting plate?
- Which rating is priced at the observed amount, and what are the prices of the 3.5KW, 6.0KW and 7.5KW options?
- What rated voltage, frequency, speed and collet type apply to each rating, and what noise level should we expect from the fan?
- Is an inverter required, and do you supply one matched to the spindle we choose?
Who this machine or part suits
Suits a router builder using a flat-plate spindle mount or a workshop upgrading an existing square-body spindle. It is the wrong choice if the machine has a round clamp, a small gantry or a low weight limit, because a square 7.5KW head is bulky.
What the listed price adds up to
This multiplies the listed price for the listed configuration. Options such as spindle power, controller or rails change the price and are confirmed first.
| Quantity | Goods at $112 each | In yuan |
|---|---|---|
| 1 | $112 | ¥745 |
| 3 | $335 | ¥2,236 |
| 5 | $559 | ¥3,727 |
Crating, seller delivery to the warehouse, our fee, international freight and import duty are added; for a machine, crating and freight can be a large part of the delivered cost.
How this price compares with other spindles listings
Of 14 spindles listings, this is the 13th cheapest at $112; the range is $6.88 to $154, median $69.44. Before comparing machine prices, check that the travel, spindle and controller in each listing actually match.
Two checks that matter for CNC spindle motor orders
Confirm power, voltage and phase together
Titles pack several ratings into one listing, such as 800W up to 7.5KW, and each rating usually has its own voltage and price. Ask which rating the shown price belongs to and whether the motor is single-phase or three-phase. A mismatch with your inverter or supply is an easy mistake, so write the exact model into the order.
Ask about brushes, bearings and run-out
A brush-type spindle uses carbon brushes that wear and need replacing, and one listing says they are mounted externally. For any spindle, ask for the bearing type, a stated run-out figure, and whether spare brushes or bearings can ship with the order. Claims such as low temperature rise or 24-hour running are the seller's words, so ask for a test video.
Questions about this CNC listing
How much does a CNC spindle motor cost from China?
Observed on the listings, prices run from US$6.88 to US$154.20, with a median of US$69.44, but those are not quotes. The shown figure normally matches one power or cooling variant, so the unit you need can cost more. Landed cost adds our service fee, domestic China freight, international freight, duty and import tax.
Can I buy this machine at the listed price?
Not as listed. The figure is the seller's price on 27 October 2026 at ¥6.668 to the dollar for the configuration in the listing. We confirm what is in the box, the voltage and the crate, then quote the delivered cost.
Can I order just one unit of the square air-cooled spindle motor?
For machines, usually yes: many sellers ship single units. For tooling and spare parts the seller may set a minimum per variant, which we confirm before ordering.
Similar spindles listings
-
Automatic Tool Change Spindle ISO20/BT30, High-Speed Water-Cooled, Metal Molds, Engraving
$154Observed 27 October 2026, not a quote
View listing -
Zhenyu/SQD High-Speed Water-Cooled Spindle Motor 800/1.5/2.2/3.2/5.5KW for Engraving
$90.63Observed 27 October 2026, not a quote
View listing -
Beijing Jingdiao Spindle Motor, 58/62/65 mm Diameter, 0.8 kW to 2.2 kW Electric Spindle for Moulds
$77.20Observed 27 October 2026, not a quote
View listing
Want the square air-cooled spindle motor delivered? Tell us the configuration, quantity and destination and we quote it line by line, crate and freight included.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Is your workshop in United States or United Kingdom? See the guides for wholesale desktop CNC machines for United States and wholesale desktop CNC machines for United Kingdom. Taken from the Taobao listing on 27 October 2026; configurations change often. A machine listing can change configuration, price or availability at any time, and specifications on it are the seller's claims until we confirm them.


