Illustrative render
Workholding
Sanou Precision Three-Jaw Lathe Chuck K11-80/100/125/160/200/250
$19.50¥130 observed on the listing, 27 October 2026. Not a quote.
We confirm the exact configuration, voltage and what is included with the seller before ordering. Single units and trial orders are fine.
What this K11 three-jaw lathe chuck listing says
A K11-series three-jaw self-centring chuck for lathes is offered here in six sizes from 80 up to 250, which in this naming style usually refers to the chuck's outside diameter in millimetres. The seller's name for the maker is Sanou, a claim we cannot verify. The title also mentions a flange plate, so it is unclear whether a mounting backplate comes with the chuck. The observed listing price is about US$19.50 (CNY 130.04) and probably belongs to one variant, most likely the smallest size.
| Type | Three-jaw lathe chuck, K11 series |
|---|---|
| Sizes | 80, 100, 125, 160, 200, 250 |
| Grade | Precision (as titled, no figure) |
| Mounting | Flange plate mentioned |
What we confirm with the machine seller first
- Which size does the observed price apply to, and what is the price for each of the six sizes?
- Is a mounting backplate (flange plate) included, and if so is it machined for our lathe spindle nose or left blank?
- Are the jaws hardened, and does the set include both outside and inside (reversible) jaws?
- What runout does the seller state for the chuck, and is a chuck key packed with it?
Who this machine or part suits
A fit for lathe owners and small resellers who need a spare or second three-jaw chuck in a known size and can machine a backplate. Look elsewhere if the chuck must fit a spindle without extra machining, because the listing does not state the mount type.
Goods cost at the listed price
Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.
| Quantity | Goods at $19.50 each | In yuan |
|---|---|---|
| 20 | $390 | ¥2,601 |
| 100 | $1,950 | ¥13,004 |
| 300 | $5,850 | ¥39,012 |
Crating, seller delivery to the warehouse, our fee, international freight and import duty are added; for a machine, crating and freight can be a large part of the delivered cost.
How this price compares with other workholding listings
Of 14 workholding listings, this is the 13th cheapest at $19.50; the range is $0.46 to $27.92, median $4.45. Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.
Two checks that matter for CNC workholding clamps orders
Ask for clamping force and repeatability as numbers
Titles use words like precision, heavy-duty and quick, which are not measurements. For vises, ask for clamping force, jaw parallelism and repeat accuracy on a datasheet. For OK-style expanding blocks, ask for the clamping range and the bolt size, since the listed M6 only fits fixtures drilled and tapped to that thread.
Allow for weight and rust protection
Vises, chucks and fixtures are dense steel items and can weigh far more than their price suggests, which raises freight. Ask for packed weight per piece, how machined faces are protected from rust, and whether parts are oiled. In mixed shipments, box heavy items separately from precision accessories to avoid damage.
Questions about this CNC listing
Where can I buy CNC workholding clamps in small quantities?
On Taobao and 1688 many sellers list clamps and vises by the piece, so a small test order is usually possible. We check the exact variant and seller, buy items from different sellers in one purchase, and inspect them at our warehouse in China before shipping. Minimums are set by the seller for each variant.
Is this the price of the complete machine?
No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.
Can I order just one unit of the K11 three-jaw lathe chuck?
For machines, usually yes: many sellers ship single units. For tooling and spare parts the seller may set a minimum per variant, which we confirm before ordering.
Similar workholding listings
-
CNC Copper Electrode Holder, Multi-Station Vise for Machining Centers
$27.92Observed 27 October 2026, not a quote
View listing -
Precision Pneumatic Vise for CNC Machining Centers, Heavy-Duty, Milling, Drill-Tap
$18.20Observed 27 October 2026, not a quote
View listing -
Precision Pneumatic Vise for CNC Machining Centers, Quick Automatic MC Vise, Angle-Fixed
$17.79Observed 27 October 2026, not a quote
View listing
Buying the K11 three-jaw lathe chuck for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Delivering the machine to Europe (EU) or United States? See the guides for wholesale desktop CNC machines for Europe (EU) and wholesale desktop CNC machines for United States. Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. A machine listing can change configuration, price or availability at any time, and specifications on it are the seller's claims until we confirm them.


