Illustrative render
Cutters and bits
German-Imported 6A Colorful Tungsten Carbide Single-Flute End Mill 3.175, Acrylic, PVC
$2.89¥19.24 observed on the listing, 27 October 2026. Not a quote.
Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.
What this single flute end mill acrylic listing says
Single-flute spiral cutters are usually chosen for plastics such as acrylic and PVC because one wide flute clears chips well and helps avoid melting. This listing covers a colorful tungsten carbide single-flute spiral end mill with a 3.175 shank, tagged 6A and described as German-imported by the seller. The origin and the 6A grade have no support in the title and should be treated as claims. Cutting diameter, flute length, overall length and the coating are not stated. The observed US$2.89 (CNY 19.24) presumably covers a single piece.
| Type | Single-flute spiral end mill |
|---|---|
| Material | Tungsten carbide, colored coating (seller wording) |
| Size | 3.175 (unit not stated) |
| Materials named | Acrylic, PVC, advertising signs |
| Grade tag | 6A (seller wording) |
What we confirm with the machine seller first
- What cutting diameter and flute length does the observed price apply to, and which other diameters on a 3.175 shank can we choose?
- Is it an up-cut, down-cut or compression spiral, since that decides surface finish and chip evacuation in acrylic?
- What proof of the German origin claim can you give: packaging with the maker's name, an invoice or a batch mark?
- What spindle speed and feed range do you advise for acrylic and PVC with this cutter, and what is the colored coating?
What this listing is good for
A match for an acrylic sign shop or PVC panel cutter who wants a plastic-cutting bit to test against current tooling. It is the wrong choice for metal or hardwood cutting, and for any buyer who wants documented German origin.
Goods cost at the listed price
Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.
| Quantity | Goods at $2.89 each | In yuan |
|---|---|---|
| 100 | $289 | ¥1,924 |
| 500 | $1,445 | ¥9,620 |
| 1,000 | $2,890 | ¥19,240 |
Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.
How this price compares with other cutters and bits listings
This $2.89 listing ranks 10th cheapest among 14 comparable ones, which run $0.92 to $7.81 (median $2.56). Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.
Two checks that matter for CNC router bits orders
Match the cutter geometry to the material
Carbide bits sold for wood are not automatically right for metal, stone or plastic. Look at flute count, coating and geometry: a single-flute spiral cutter is sold for acrylic and PVC, while a diamond flat-bottom bit is listed for marble. Ask which material the seller tested and whether speed guidance is available.
Treat grade labels and brand names as claims
Labels such as 5A, 6A, imported or a named brand are the seller's descriptions, not checked specifications. Ask for the carbide grade or hardness, the coating type and the country of manufacture, then test one piece on your material. Compare edge wear after a standard cut before ordering a larger count.
Buying this item: common questions
What is the difference between engraving bits and end mills?
Engraving bits usually have a fine tapered or pointed tip for lettering and relief carving, while end mills have a flat cutting end for clearing material and profiling. This page has both: tapered 3.175 and 4mm bits and a long 4-flute flat cutter. Check the geometry in the listing before assuming its use.
Is this the price of the complete machine?
No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.
Is there a minimum order for the single flute end mill acrylic?
Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.
Similar cutters and bits listings
-
$3.10Observed 27 October 2026, not a quote
View listing -
3.175 4mm Tungsten Carbide Flat-Tip Engraving Bit for Metal, Stainless Steel, Copper, 5A
$2.77Observed 27 October 2026, not a quote
View listing -
Colorful Tungsten Carbide Triangular Pointed Engraving Bit for Wood Furniture and Jade
$2.73Observed 27 October 2026, not a quote
View listing
Buying the single flute end mill acrylic for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Delivering the machine to Europe (EU) or United States? See the guides for wholesale desktop CNC machines for Europe (EU) and wholesale desktop CNC machines for United States. Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.


