Illustrative render
Cutters and bits
Colorful Tungsten Carbide Triangular Pointed Engraving Bit for Wood Furniture and Jade
$2.73¥18.18 observed on the listing, 27 October 2026. Not a quote.
We confirm the exact configuration, voltage and what is included with the seller before ordering. Single units and trial orders are fine.
What this triangular pointed engraving bit listing says
A three-edged pointed bit, finished in a rainbow-colored coating, is what this listing sells for carving wood furniture and jade on CNC engraving machines. Three cutting edges converge to a sharp point, which suits line carving and detail rather than clearing wide areas. The coating is described only by color, so its material is unknown. The title leaves out shank diameter, point angle and overall length. The observed price is US$2.73 (CNY 18.18), and a single piece is the most likely unit.
| Type | Triangular (three-edge) pointed engraving bit |
|---|---|
| Material | Tungsten carbide (tungsten steel) |
| Finish | Rainbow-colored coating (seller wording) |
| Applications | Wood furniture carving, jade carving |
| Use | CNC engraving machines |
What we confirm with the machine seller first
- What shank diameter, point angle and overall length does the observed price apply to, and are other sizes in the variant list?
- What is the colored finish: a PVD coating such as titanium nitride, or only a surface tint? Please state the coating material.
- Have you used this bit on jade, and how long does it last there compared with wood, since jade is very hard?
- Does the bit have three cutting edges ground to a sharp point, and how are the tips protected in packing?
Who this machine or part suits
Worth considering for a furniture carving shop or craft engraver who wants a pointed bit for detail work in wood. It is the wrong choice for volume jade carving, where diamond tooling is the more usual choice, or for roughing out large pockets.
Goods cost at the listed price
Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.
| Quantity | Goods at $2.73 each | In yuan |
|---|---|---|
| 100 | $273 | ¥1,818 |
| 500 | $1,365 | ¥9,090 |
| 1,000 | $2,730 | ¥18,180 |
Crating, seller delivery to the warehouse, our fee, international freight and import duty are added; for a machine, crating and freight can be a large part of the delivered cost.
How this price compares with other cutters and bits listings
Of 14 cutters and bits listings, this is the 8th cheapest at $2.73; the range is $0.92 to $7.81, median $2.56. Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.
Two checks that matter for CNC router bits orders
Confirm shank diameter against your collet
A bit only works if its shank matches the collet bore. These listings mention 3.175 mm, which is 1/8 inch, and 4 mm. Those figures are normally shank diameters, but ask the seller to confirm, because the two sizes cannot share one collet. Write the shank size into the order, and ask whether a listing offers several sizes under a single price.
Match the cutter geometry to the material
Carbide bits sold for wood are not automatically right for metal, stone or plastic. Look at flute count, coating and geometry: a single-flute spiral cutter is sold for acrylic and PVC, while a diamond flat-bottom bit is listed for marble. Ask which material the seller tested and whether speed guidance is available.
Questions about this CNC listing
Do I need to inspect CNC router bits when they arrive?
Yes, a quick check is sensible, because small tips can chip in transit and a seller can ship a different variant. We receive the goods at our warehouse in China and can check tip condition, markings and counts against your order before shipping. Tell us in advance which dimensions to measure, such as shank diameter and angle.
Is this the price of the complete machine?
No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.
Can I order just one unit of the triangular pointed engraving bit?
For machines, usually yes: many sellers ship single units. For tooling and spare parts the seller may set a minimum per variant, which we confirm before ordering.
Similar cutters and bits listings
-
3.175 4mm Tungsten Carbide Flat-Tip Engraving Bit for Metal, Stainless Steel, Copper, 5A
$2.77Observed 27 October 2026, not a quote
View listing -
Imported High-Precision Tungsten Carbide Flat-Tip Engraving Bit for CNC Metal Lettering
$2.40Observed 27 October 2026, not a quote
View listing -
German-Imported 6A Colorful Tungsten Carbide Single-Flute End Mill 3.175, Acrylic, PVC
$2.89Observed 27 October 2026, not a quote
View listing
Buying the triangular pointed engraving bit for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Delivering the machine to Europe (EU) or United States? See the guides for wholesale desktop CNC machines for Europe (EU) and wholesale desktop CNC machines for United States. Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. A machine listing can change configuration, price or availability at any time, and specifications on it are the seller's claims until we confirm them.


