Skip to content

Cutters and bits

Tungsten Carbide Tapered Engraving Bit 3.175, 10 to 90 Degree, for CNC Engraving Machines

$2.02¥13.50 observed on the listing, 27 October 2026. Not a quote.

Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.

What this tungsten carbide tapered engraving bit listing says

Choosing the angle is the main decision with this tungsten carbide tapered engraving bit: the listing offers 10 to 90 degrees on a 3.175 shank, for CNC lettering machines. A narrow angle makes fine, detailed lines but a fragile tip; a wide angle is stronger but cuts broader grooves. The title gives neither the tip width nor the cutting length, and it does not say whether the angle is the included angle or the half angle. The observed price is US$2.02 (CNY 13.50), and it will probably vary by angle.

TypeTapered engraving bit
MaterialTungsten carbide
Shank size3.175 (unit not stated)
Angle range10 to 90 degrees
UseCNC engraving machines, lettering

Questions for the seller before you buy a machine

  • Which angle does the observed price belong to, and is there a price list for 10, 20, 30, 45, 60 and 90 degrees?
  • Is the angle quoted as the full included angle or the half angle, and what tip diameter or flat width can we select?
  • What cutting length and overall length does each angle come in, and is the shank 3.175 mm with a tolerance suited to ER11 collets?
  • Is the tip a pointed V or a small flat, and how are the bits packed to keep the fine tips from chipping?

What this listing is good for

A good match for a lettering and signage workshop that needs an assortment of angles for different line widths, and for resellers who sell by angle. It is the wrong choice for deep roughing cuts, where narrow tapered tips snap.

What the listed price adds up to

This multiplies the listed price for the listed configuration. Options such as spindle power, controller or rails change the price and are confirmed first.

QuantityGoods at $2.02 eachIn yuan
100$202¥1,350
500$1,010¥6,750
1,000$2,020¥13,500

Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.

How this price compares with other cutters and bits listings

This $2.02 listing ranks 5th cheapest among 14 comparable ones, which run $0.92 to $7.81 (median $2.56). Before comparing machine prices, check that the travel, spindle and controller in each listing actually match.

Two checks that matter for CNC router bits orders

Confirm shank diameter against your collet

A bit only works if its shank matches the collet bore. These listings mention 3.175 mm, which is 1/8 inch, and 4 mm. Those figures are normally shank diameters, but ask the seller to confirm, because the two sizes cannot share one collet. Write the shank size into the order, and ask whether a listing offers several sizes under a single price.

Treat grade labels and brand names as claims

Labels such as 5A, 6A, imported or a named brand are the seller's descriptions, not checked specifications. Ask for the carbide grade or hardness, the coating type and the country of manufacture, then test one piece on your material. Compare edge wear after a standard cut before ordering a larger count.

All cutters and bits checks and listings

Buying this item: common questions

Which CNC router bits suit engraving lettering into metal?

Carbide flat-tip tapered bits are the usual choice for metal lettering, and several listings here describe them for that use, some with DLC or titanium-type coatings in 3.175 or 4mm sizes. Whether they suit your alloy depends on spindle rigidity and feeds, so run a scrap test first and ask the seller which metals were tested.

Can I buy this machine at the listed price?

Not as listed. The figure is the seller's price on 27 October 2026 at ¥6.668 to the dollar for the configuration in the listing. We confirm what is in the box, the voltage and the crate, then quote the delivered cost.

Is there a minimum order for the tungsten carbide tapered engraving bit?

Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.

Want the tungsten carbide tapered engraving bit delivered? Tell us the configuration, quantity and destination and we quote it line by line, crate and freight included.

Price this landed

Wholesale desktop CNC machines from China covers how small orders work. Is your workshop in Europe (EU) or United States? See the guides for wholesale desktop CNC machines for Europe (EU) and wholesale desktop CNC machines for United States. Taken from the Taobao listing on 27 October 2026; configurations change often. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.