Illustrative render
Cutters and bits
Lidiao 4mm Flat-Tip Tapered Engraving Bit for CNC Relief Carving
$2.35¥15.66 observed on the listing, 27 October 2026. Not a quote.
Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.
What this 4mm flat tip tapered bit listing says
At 4mm, this flat-tip tapered bit is probably a step up in shank size from the common 3.175 version, aimed at relief carving on CNC engraving machines and sold under the seller's Lidiao name. Because a 4 mm shank needs a matching 4 mm collet, check that your spindle can take it. The title does not give cone angle, tip width, material or coating, and it does not say whether 4mm is the shank or the body. The observed US$2.35 (CNY 15.66) is probably for a single bit at the default angle.
| Type | Flat-tip tapered engraving bit |
|---|---|
| Size | 4mm (shank or body not specified) |
| Use | CNC relief carving |
| Brand named | Lidiao (seller claim) |
What we confirm with the machine seller first
- Does the 4mm refer to the shank diameter, the body diameter or the tip width, and what is the full cutting length?
- What cone angle and tip width apply to the observed price, and which other angles can be selected?
- What material is this bit, and is the tip coated? Please state whether it is carbide or high-speed steel.
- Do you also make the same bit with a 3.175 shank, and is the 4mm shank ground to a close tolerance for a collet?
What this listing is good for
Relevant to a relief carving workshop whose spindle collet is 4 mm and which wants a thicker shank than 3.175. It is the wrong choice if your spindle only holds 3.175 or 1/8 inch, or if you need fine lettering that wants a very small tip.
Goods cost at the listed price
Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.
| Quantity | Goods at $2.35 each | In yuan |
|---|---|---|
| 100 | $235 | ¥1,566 |
| 500 | $1,175 | ¥7,830 |
| 1,000 | $2,350 | ¥15,660 |
Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.
How this price compares with other cutters and bits listings
This $2.35 listing ranks 6th cheapest among 14 comparable ones, which run $0.92 to $7.81 (median $2.56). Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.
Two checks that matter for CNC router bits orders
Specify tip width and included angle
For a tapered engraving bit, the tip width and the included angle decide line width, detail and depth. A title such as 10 to 90 degree lists a range under one price. Ask the seller to confirm the exact tip width and angle for the variant you choose, and record both in the order so every piece in a batch matches.
Treat grade labels and brand names as claims
Labels such as 5A, 6A, imported or a named brand are the seller's descriptions, not checked specifications. Ask for the carbide grade or hardness, the coating type and the country of manufacture, then test one piece on your material. Compare edge wear after a standard cut before ordering a larger count.
Buying this item: common questions
What is the difference between engraving bits and end mills?
Engraving bits usually have a fine tapered or pointed tip for lettering and relief carving, while end mills have a flat cutting end for clearing material and profiling. This page has both: tapered 3.175 and 4mm bits and a long 4-flute flat cutter. Check the geometry in the listing before assuming its use.
Is this the price of the complete machine?
No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.
Is there a minimum order for the 4mm flat tip tapered bit?
Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.
Similar cutters and bits listings
-
Imported High-Precision Tungsten Carbide Flat-Tip Engraving Bit for CNC Metal Lettering
$2.40Observed 27 October 2026, not a quote
View listing -
Tungsten Carbide Tapered Engraving Bit 3.175, 10 to 90 Degree, for CNC Engraving Machines
$2.02Observed 27 October 2026, not a quote
View listing -
Colorful Tungsten Carbide Triangular Pointed Engraving Bit for Wood Furniture and Jade
$2.73Observed 27 October 2026, not a quote
View listing
Buying the 4mm flat tip tapered bit for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Delivering the machine to United Kingdom or Australia? See the guides for wholesale desktop CNC machines for United Kingdom and wholesale desktop CNC machines for Australia. Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.


