Illustrative render
Workholding
Pneumatic OK Clamp, Multi-Station Expanding Clamp for CNC Machining Centers, Side Vise
$1.84¥12.25 observed on the listing, 27 October 2026. Not a quote.
Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.
What this pneumatic OK clamp multi-station listing says
Air operation is the headline of this listing: the title says pneumatic OK clamp, multi-station, an expanding clamper for machining-centre fixtures with a side-vise description. At roughly US$1.84 (CNY 12.25) observed on the listing, the price sits next to the plain mechanical blocks, so a buyer should find out whether it covers only a clamp block or a working air-driven unit with cylinder, fittings and a valve. The title gives no bore size, air pressure, clamping force, stroke or station count, and none of those can be assumed.
| Type | OK clamp, expanding clamper |
|---|---|
| Drive | Pneumatic (as titled) |
| Stations | Multi-station |
| Application | CNC machining centre fixtures, side vise |
What we confirm with the machine seller first
- Does the price cover the clamp block only, or also the air cylinder, fittings and any valve needed to run it?
- What air pressure range does the clamp need, and what clamping force does it give at that pressure?
- How many stations does one unit have, and what is the stroke at each station?
- What is the mounting hole pattern or thread, and can you send a drawing with dimensions before we order a lot?
What this listing is good for
Aimed at a shop building an air-clamped fixture that wants to test the concept cheaply before ordering matched sets. Skip it if the machine has no compressed air at the pallet, or if a safety-rated clamping system is required.
Goods cost at the listed price
Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.
| Quantity | Goods at $1.84 each | In yuan |
|---|---|---|
| 100 | $184 | ¥1,225 |
| 500 | $920 | ¥6,125 |
| 1,000 | $1,840 | ¥12,250 |
Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.
How this price compares with other workholding listings
This $1.84 listing ranks 5th cheapest among 14 comparable ones, which run $0.46 to $27.92 (median $4.45). Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.
Two checks that matter for CNC workholding clamps orders
Confirm jaw width, opening and variant size
Vise and chuck listings often cover several sizes under one price: 6 to 8 inch for the modular vise, K11-80 up to 250 for the chuck. The price shown is likely for the smallest variant. Ask for jaw width, maximum opening and the price for your size, and compare them with the table size and travel of your machine.
Tell near-identical listings apart
Two workpiece locator listings share the same title yet are observed at US$4.31 and US$4.59, and several OK clamp listings differ only by multi-station, bidirectional or pneumatic wording. Ask each seller for dimensions, material, weight and pack contents, and keep photos of the exact item so you know which variant you are buying.
Buying this item: common questions
Where can I buy CNC workholding clamps in small quantities?
On Taobao and 1688 many sellers list clamps and vises by the piece, so a small test order is usually possible. We check the exact variant and seller, buy items from different sellers in one purchase, and inspect them at our warehouse in China before shipping. Minimums are set by the seller for each variant.
Is this the price of the complete machine?
No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.
Is there a minimum order for the pneumatic OK clamp multi-station?
Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.
Similar workholding listings
-
Pneumatic OK Clamp, Bidirectional Multi-Station Wedge Expanding Block for CNC Machining
$1.85Observed 27 October 2026, not a quote
View listing -
OK Clamp, Bidirectional Multi-Station Expanding Block for CNC Machining Centers, Side Vise
$1.83Observed 27 October 2026, not a quote
View listing -
Small Multifunction Mini Universal Bench Vise for Home and Woodworking
$1.51Observed 27 October 2026, not a quote
View listing
Buying the pneumatic OK clamp multi-station for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Delivering the machine to Canada or Europe (EU)? See the guides for wholesale desktop CNC machines for Canada and wholesale desktop CNC machines for Europe (EU). Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.


