Skip to content

Tool holding

Huoka ER Collets ER11/16/20/25/32 for CNC Engraving Spindles, Spring Clamping Sleeve

$2.02¥13.45 observed on the listing, 27 October 2026. Not a quote.

We confirm the exact configuration, voltage and what is included with the seller before ordering. Single units and trial orders are fine.

What this ER collets for engraving spindles listing says

Five ER series, from ER11 up to ER32, are offered as spring clamping sleeves for CNC engraving spindles under the seller's Huoka name, which is an unverified brand claim. The Chinese title puts ER32 and ER20 first and also uses a term that may refer to a locking nut, which suggests a nut might be sold with it, but this is not confirmed. There is no bore list, accuracy class, runout value or piece count. Unlike other listings, this range stops at ER32. The observed price is US$2.02 (CNY 13.45).

Collet seriesER11, ER16, ER20, ER25, ER32
TypeSpring clamping sleeve collets
UseCNC engraving machine spindles
Brand namedHuoka (seller claim)

Questions for the seller before you buy a machine

  • Which ER series and bore does the observed price apply to, and what is the price per collet for ER11 and ER32?
  • Does the term in the title that may mean lock nut show that a nut is included, and if so which type and thread size?
  • What accuracy or runout class applies to this range, and have you measured it on a sample from the batch we would receive?
  • Are the sleeves hardened and ground, and can you send a macro photo showing the slit pattern and the size marking?

Who this machine or part suits

Relevant to an engraver owner or reseller who stocks ER11 to ER32 spares and is comfortable ordering by bore size. It is the wrong choice if you need ER8 or ER40, which this listing does not include.

What the listed price adds up to

This multiplies the listed price for the listed configuration. Options such as spindle power, controller or rails change the price and are confirmed first.

QuantityGoods at $2.02 eachIn yuan
100$202¥1,345
500$1,010¥6,725
1,000$2,020¥13,450

Crating, seller delivery to the warehouse, our fee, international freight and import duty are added; for a machine, crating and freight can be a large part of the delivered cost.

How this price compares with other tool holding listings

Of 14 tool holding listings, this is the 6th cheapest at $2.02; the range is $1.06 to $15.40, median $2.19. Before comparing machine prices, check that the travel, spindle and controller in each listing actually match.

Two checks that matter for ER collet orders

State the bore diameter for every collet

Each collet grips a narrow range of shank diameters, and the listing price often applies to one bore only. Write down each shank size you use, such as 3.175 mm or 6 mm, and ask the seller to confirm the bore for the matching variant. A single listing may be sold per piece or as a set, so read the variant names carefully.

Do not mix lathe collets with the ER series

Step collets such as 0640 and the 36/46/52 spring-steel collets usually belong to lathe or instrument-lathe systems and do not fit ER nuts. Check the spindle taper and draw method of your own machine before buying, and ask for the exact collet model and hole shape, since round, hex and square holes are separate variants.

All tool holding checks and listings

Questions about this CNC listing

Are a tool holder and a collet chuck the same thing?

Not exactly. A tool holder is any body that carries a cutter between spindle and workpiece, and a collet chuck is one type that clamps with a collet. In these listings the BT40 holder is sold with collets, while the C32/C42 chuck is described separately, so check which collet type each body takes.

Can I buy this machine at the listed price?

Not as listed. The figure is the seller's price on 27 October 2026 at ¥6.668 to the dollar for the configuration in the listing. We confirm what is in the box, the voltage and the crate, then quote the delivered cost.

Can I order just one unit of the ER collets for engraving spindles?

For machines, usually yes: many sellers ship single units. For tooling and spare parts the seller may set a minimum per variant, which we confirm before ordering.

Want the ER collets for engraving spindles delivered? Tell us the configuration, quantity and destination and we quote it line by line, crate and freight included.

Price this landed

Wholesale desktop CNC machines from China covers how small orders work. Is your workshop in United States or United Kingdom? See the guides for wholesale desktop CNC machines for United States and wholesale desktop CNC machines for United Kingdom. Taken from the Taobao listing on 27 October 2026; configurations change often. A machine listing can change configuration, price or availability at any time, and specifications on it are the seller's claims until we confirm them.