Illustrative render
Tool holding
ER11/ER16/ER20/ER25 Spindle Motor Extension Tool Shank for DIY Engraving Machines
$2.24¥14.94 observed on the listing, 27 October 2026. Not a quote.
Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.
What this ER spindle extension shank listing says
This is not a collet but a tool shank, also called an extension or connecting rod, that fits a motor spindle and carries an ER collet seat in ER11, ER16, ER20 or ER25 for DIY engraving machines. Its purpose is to add reach or to convert a bare motor shaft into a collet holder. The title does not state shaft bore, overall length, runout, or whether the collet and nut are included. The motor shaft diameter is the decisive dimension. The observed US$2.24 (CNY 14.94) is for one variant.
| Type | Spindle motor extension tool shank, connecting rod |
|---|---|
| Collet seat options | ER11, ER16, ER20, ER25 |
| Use | DIY engraving machine motor spindles |
Questions for the seller before you buy a machine
- What motor shaft diameter and bore fit does each ER11, ER16, ER20 and ER25 variant take, and how is it fixed to the shaft: set screw, taper or thread?
- What are the overall length, the collet seat depth and the maximum speed rating of the shank?
- Are an ER nut and collet included for each variant, or is the shank sold alone?
- What runout does the shank show when mounted on a straight shaft, and is it balanced for high-speed use?
What this listing is good for
Sensible for a DIY builder who has a bare motor shaft and wants to add an ER collet seat, or a hobby spares seller. It is the wrong choice for a spindle with its own built-in ER nut thread, where this shank only adds length and runout.
What the listed price adds up to
This multiplies the listed price for the listed configuration. Options such as spindle power, controller or rails change the price and are confirmed first.
| Quantity | Goods at $2.24 each | In yuan |
|---|---|---|
| 100 | $224 | ¥1,494 |
| 500 | $1,120 | ¥7,470 |
| 1,000 | $2,240 | ¥14,940 |
Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.
How this price compares with other tool holding listings
This $2.24 listing ranks 8th cheapest among 14 comparable ones, which run $1.06 to $15.40 (median $2.19). Before comparing machine prices, check that the travel, spindle and controller in each listing actually match.
Two checks that matter for ER collet orders
Match the ER series to your spindle nut
ER sizes are not interchangeable: an ER11 collet will not seat in an ER16 nut. Ask for the series that matches the nut already on your spindle, and whether the order includes the nut. Also confirm the nut style, since ER-A and ER-M types exist, and some holders ship as a body with no nut at all.
Treat precision grades as seller labels
UP and similar grade marks on a listing are the seller's labels. Ask for a stated run-out figure, the steel and hardening process, and whether collet and nut come as a matched pair. A quick test, clamping a gauge pin and reading run-out on a dial indicator, checks the batch, and an inspection step can be arranged before shipping.
Buying this item: common questions
Can I order a few collet sizes from different sellers together?
Yes. We buy from several sellers in one purchase, inspect the parts at our warehouse in China and ship them in one parcel, which suits low-value parts because fixed shipping and clearance charges are shared. Ask for a count check by size and bore on arrival, since mixed small parts are easy to short-pack.
Can I buy this machine at the listed price?
Not as listed. The figure is the seller's price on 27 October 2026 at ¥6.668 to the dollar for the configuration in the listing. We confirm what is in the box, the voltage and the crate, then quote the delivered cost.
Is there a minimum order for the ER spindle extension shank?
Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.
Similar tool holding listings
-
High-Precision ER Collet Extension Holder A/M/UM Type, 8/11/16/20/25/32, for CNC Lathes
$3.02Observed 27 October 2026, not a quote
View listing -
UP ER20/ER25/ER32 Collets for CNC Engraving Machine Spindles, High-Precision
$2.14Observed 27 October 2026, not a quote
View listing -
Huoka ER Collets ER11/16/20/25/32 for CNC Engraving Spindles, Spring Clamping Sleeve
$2.02Observed 27 October 2026, not a quote
View listing
Want the ER spindle extension shank delivered? Tell us the configuration, quantity and destination and we quote it line by line, crate and freight included.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Is your workshop in United Kingdom or Australia? See the guides for wholesale desktop CNC machines for United Kingdom and wholesale desktop CNC machines for Australia. Taken from the Taobao listing on 27 October 2026; configurations change often. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.


