Skip to content

Tool holding

High-Precision ER Spring Collets for CNC Engraving Tool Holders, ER8/11/16/20/25/32/40

$1.06¥7.09 observed on the listing, 27 October 2026. Not a quote.

We confirm the exact configuration, voltage and what is included with the seller before ordering. Single units and trial orders are fine.

What this ER20 spring collet engraving listing says

ER spring collets grip a cutter inside an ER nut and holder; this listing covers series sizes ER8, 11, 16, 20, 25, 32 and 40 and starts the title with ER20. A collet is normally sold per bore diameter within each series, such as 3.175 mm or 6 mm, and the title does not list the bore sizes, the number of pieces or whether a nut is included. The high-precision wording has no runout figure. The observed US$1.06 (CNY 7.09) is probably the price of a single collet of one series.

TypeER spring collets
Series namedER8, ER11, ER16, ER20, ER25, ER32, ER40
UseCNC engraving machine tool holders
ClaimHigh precision (no runout figure)

What we confirm with the machine seller first

  • Which ER series and bore diameter does the observed price cover, and is that price for one collet or for a set?
  • What accuracy class and measured runout do these collets have, and is the figure from your own testing or from the maker?
  • Do the collets fit standard ER nuts, and is a nut included or must it be bought separately for each size?
  • Which bore sizes, metric and inch, are available for ER20 and ER32, and what is the clamping range of each collet?

Who this machine or part suits

Right for a workshop restocking collets in several bore sizes, or a reseller building an ER spares assortment. It is the wrong choice if you need a single collet with verified runout for finishing cuts, because the accuracy class and tolerance are not stated.

Goods cost at the listed price

Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.

QuantityGoods at $1.06 eachIn yuan
100$106¥709
500$530¥3,545
1,000$1,060¥7,090

Crating, seller delivery to the warehouse, our fee, international freight and import duty are added; for a machine, crating and freight can be a large part of the delivered cost.

How this price compares with other tool holding listings

Of 14 tool holding listings, this is the 1st cheapest at $1.06; the range is $1.06 to $15.40, median $2.19. Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.

Two checks that matter for ER collet orders

Match the ER series to your spindle nut

ER sizes are not interchangeable: an ER11 collet will not seat in an ER16 nut. Ask for the series that matches the nut already on your spindle, and whether the order includes the nut. Also confirm the nut style, since ER-A and ER-M types exist, and some holders ship as a body with no nut at all.

State the bore diameter for every collet

Each collet grips a narrow range of shank diameters, and the listing price often applies to one bore only. Write down each shank size you use, such as 3.175 mm or 6 mm, and ask the seller to confirm the bore for the matching variant. A single listing may be sold per piece or as a set, so read the variant names carefully.

All tool holding checks and listings

Questions about this CNC listing

What is an ER collet and which size do I need?

It is a slotted sleeve that clamps a cutter shank in a spindle nut. The series you need depends on the nut on your spindle, not on the cutter: ER11 suits small engraving spindles, and larger series suit bigger spindles. Once you have the series, choose the bore that matches each cutter shank.

Is this the price of the complete machine?

No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.

Can I order just one unit of the ER20 spring collet engraving?

For machines, usually yes: many sellers ship single units. For tooling and spare parts the seller may set a minimum per variant, which we confirm before ordering.

Buying the ER20 spring collet engraving for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.

Price this landed

Wholesale desktop CNC machines from China covers how small orders work. Delivering the machine to United States or United Kingdom? See the guides for wholesale desktop CNC machines for United States and wholesale desktop CNC machines for United Kingdom. Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. A machine listing can change configuration, price or availability at any time, and specifications on it are the seller's claims until we confirm them.