Skip to content

Tool holding

0640 Finished Step Collet for CNC Instrument Lathes, High-Frequency Hardened

$1.54¥10.28 observed on the listing, 27 October 2026. Not a quote.

Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.

What this 0640 step collet instrument lathe listing says

Not an ER collet at all, this listing is a finished step collet for small CNC instrument lathes, labelled 0640 and described as a spring clamping sleeve that has been high-frequency hardened. The 0640 figure appears to be a collet series or lathe-family code rather than a bore size, and the bore is the first thing a buyer must specify. The title gives no bore range, step dimensions or material, and the claim of a sturdy, durable part has no test value behind it. The observed US$1.54 (CNY 10.28) is probably for one piece.

TypeFinished step collet, spring clamping sleeve
Series code0640
FitsCNC instrument lathes
TreatmentHigh-frequency hardened

What we confirm with the machine seller first

  • What bore diameter and step dimensions does the observed price correspond to, and in which bore sizes can the 0640 collet be ordered?
  • What are the collet's outside taper, length and thread detail, so we can check it against our lathe's spindle drawing?
  • What material is the collet made from, and what hardness range does the high-frequency treatment reach?
  • Is it sold as a single piece, and can the bore be supplied blank or finished to size on request?

What this listing is good for

Handy for a repair shop or reseller supplying owners of small instrument lathes who know their lathe uses the 0640 collet. It is the wrong choice if your machine takes ER collets or another series, because this part cannot be adapted by guesswork.

Goods cost at the listed price

Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.

QuantityGoods at $1.54 eachIn yuan
100$154¥1,028
500$770¥5,140
1,000$1,540¥10,280

Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.

How this price compares with other tool holding listings

This $1.54 listing ranks 3rd cheapest among 14 comparable ones, which run $1.06 to $15.40 (median $2.19). Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.

Two checks that matter for ER collet orders

State the bore diameter for every collet

Each collet grips a narrow range of shank diameters, and the listing price often applies to one bore only. Write down each shank size you use, such as 3.175 mm or 6 mm, and ask the seller to confirm the bore for the matching variant. A single listing may be sold per piece or as a set, so read the variant names carefully.

Check shank length and taper on holders

Holders and extension shanks must match the machine's spindle interface, whether a straight shank, a BT40 taper or another standard. Ask for overall length, shank diameter, taper standard and the maximum rated speed. For the BT40 and C32/C42 items, also ask whether pull studs or draw bars are included, since they may be sold separately.

All tool holding checks and listings

Buying this item: common questions

Why are collets so cheap on Chinese listings?

Observed prices here start at US$1.06 and the median is US$2.14, which usually reflects one small collet at one bore size, not a full set. Price says nothing about run-out, so judge by stated precision, test results and what the seller says is included. Always ask what one listed price buys.

Is this the price of the complete machine?

No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.

Is there a minimum order for the 0640 step collet instrument lathe?

Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.

Buying the 0640 step collet instrument lathe for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.

Price this landed

Wholesale desktop CNC machines from China covers how small orders work. Delivering the machine to United States or United Kingdom? See the guides for wholesale desktop CNC machines for United States and wholesale desktop CNC machines for United Kingdom. Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.