Illustrative render
Tool holding
Weite ER20/ER25/ER32 Spring Collets and ER Nuts for Engraving Machines
$1.72¥11.50 observed on the listing, 27 October 2026. Not a quote.
Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.
What this ER20 ER25 ER32 collets with nut listing says
Three collet series, ER20, ER25 and ER32, are listed along with ER nuts for engraving machines, under the seller's Weite brand claim. A collet and its nut are separate parts, so the listing may offer either or both depending on the variant, and the title does not say which. Bore diameters, accuracy class and nut type are also unlisted. The collet series must match the spindle's own nut thread. The observed US$1.72 (CNY 11.50) probably prices one piece of one variant.
| Collet series | ER20, ER25, ER32 |
|---|---|
| Parts named | Spring collets, ER nuts |
| Use | Engraving machines |
| Brand named | Weite (seller claim) |
What we confirm with the machine seller first
- Is the observed price for a collet, a nut or both together, and which of ER20, ER25 or ER32 is the variant behind it?
- Which bore diameters are available for each collet series, and is the bore selected in the variant list or by message?
- Is the nut a standard A-type or a bearing M-type, and what is its wrench size so we can confirm it fits our spanner?
- What accuracy class applies, and can you photograph the markings on the collet and the nut so we can compare them?
What this listing is good for
Works for an engraving-machine owner who wants matching nuts and collets in three common ER sizes, and a reseller bundling spares. It is the wrong choice if your spindle takes an ER11 or ER16 collet, since neither is on this list.
Goods cost at the listed price
Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.
| Quantity | Goods at $1.72 each | In yuan |
|---|---|---|
| 100 | $172 | ¥1,150 |
| 500 | $860 | ¥5,750 |
| 1,000 | $1,720 | ¥11,500 |
Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.
How this price compares with other tool holding listings
This $1.72 listing ranks 4th cheapest among 14 comparable ones, which run $1.06 to $15.40 (median $2.19). Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.
Two checks that matter for ER collet orders
Do not mix lathe collets with the ER series
Step collets such as 0640 and the 36/46/52 spring-steel collets usually belong to lathe or instrument-lathe systems and do not fit ER nuts. Check the spindle taper and draw method of your own machine before buying, and ask for the exact collet model and hole shape, since round, hex and square holes are separate variants.
Check shank length and taper on holders
Holders and extension shanks must match the machine's spindle interface, whether a straight shank, a BT40 taper or another standard. Ask for overall length, shank diameter, taper standard and the maximum rated speed. For the BT40 and C32/C42 items, also ask whether pull studs or draw bars are included, since they may be sold separately.
Buying this item: common questions
Can I order a few collet sizes from different sellers together?
Yes. We buy from several sellers in one purchase, inspect the parts at our warehouse in China and ship them in one parcel, which suits low-value parts because fixed shipping and clearance charges are shared. Ask for a count check by size and bore on arrival, since mixed small parts are easy to short-pack.
Is this the price of the complete machine?
No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.
Is there a minimum order for the ER20 ER25 ER32 collets with nut?
Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.
Similar tool holding listings
-
High-Precision ER Spring Collets for Engraving Machines, ER8/11/16/20/25/32/40
$1.81Observed 27 October 2026, not a quote
View listing -
0640 Finished Step Collet for CNC Instrument Lathes, High-Frequency Hardened
$1.54Observed 27 October 2026, not a quote
View listing -
Huoka ER Collets ER11/16/20/25/32 for CNC Engraving Spindles, Spring Clamping Sleeve
$2.02Observed 27 October 2026, not a quote
View listing
Buying the ER20 ER25 ER32 collets with nut for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Delivering the machine to Australia or Canada? See the guides for wholesale desktop CNC machines for Australia and wholesale desktop CNC machines for Canada. Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.


