Illustrative render
Tool holding
Taiwan High-Precision ER Collets ER8/ER11/ER16/ER20/ER25/ER32, UP
$6.44¥42.97 observed on the listing, 27 October 2026. Not a quote.
Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.
What this ER8 to ER32 collets UP grade listing says
A Taiwan origin is claimed in the Chinese title of this high-precision UP-grade ER collet listing, which covers ER8, ER11, ER16, ER20, ER25 and ER32. Origin claims on marketplace listings are the seller's words, and without maker markings or an invoice they cannot be treated as verified. This is the most expensive of the ER collet listings in this range, and its observed price is US$6.44 (CNY 42.97), so it makes sense to ask what the extra money buys: a stated runout, a named maker or a particular heat treatment.
| Collet series | ER8, ER11, ER16, ER20, ER25, ER32 |
|---|---|
| Grade tag | UP (seller wording) |
| Origin claim | Taiwan (seller claim) |
| Claim | High precision |
Questions for the seller before you buy a machine
- What evidence supports the Taiwan origin: maker markings, packaging, a purchase invoice or a certificate, and can you photograph them?
- What runout do you state for ER8 and ER32 at UP grade, and can you send a measured test report for a sample from the batch?
- Is the observed price per collet, per set of bores or per series, and which bore sizes are available in each series?
- Do the collets come in an individual sleeve or box with the size marked, and are nuts sold with them?
What this listing is good for
Aimed at a buyer who wants to compare a pricier collet line with the cheap ones and is prepared to ask for origin evidence and runout data. It is the wrong choice for a budget restock where cost per collet matters more than a claimed grade.
What the listed price adds up to
This multiplies the listed price for the listed configuration. Options such as spindle power, controller or rails change the price and are confirmed first.
| Quantity | Goods at $6.44 each | In yuan |
|---|---|---|
| 20 | $129 | ¥859 |
| 100 | $644 | ¥4,297 |
| 300 | $1,932 | ¥12,891 |
Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.
How this price compares with other tool holding listings
This $6.44 listing ranks 11th cheapest among 14 comparable ones, which run $1.06 to $15.40 (median $2.19). Before comparing machine prices, check that the travel, spindle and controller in each listing actually match.
Two checks that matter for ER collet orders
Match the ER series to your spindle nut
ER sizes are not interchangeable: an ER11 collet will not seat in an ER16 nut. Ask for the series that matches the nut already on your spindle, and whether the order includes the nut. Also confirm the nut style, since ER-A and ER-M types exist, and some holders ship as a body with no nut at all.
State the bore diameter for every collet
Each collet grips a narrow range of shank diameters, and the listing price often applies to one bore only. Write down each shank size you use, such as 3.175 mm or 6 mm, and ask the seller to confirm the bore for the matching variant. A single listing may be sold per piece or as a set, so read the variant names carefully.
Buying this item: common questions
Why are collets so cheap on Chinese listings?
Observed prices here start at US$1.06 and the median is US$2.14, which usually reflects one small collet at one bore size, not a full set. Price says nothing about run-out, so judge by stated precision, test results and what the seller says is included. Always ask what one listed price buys.
Can I buy this machine at the listed price?
Not as listed. The figure is the seller's price on 27 October 2026 at ¥6.668 to the dollar for the configuration in the listing. We confirm what is in the box, the voltage and the crate, then quote the delivered cost.
Is there a minimum order for the ER8 to ER32 collets UP grade?
Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.
Similar tool holding listings
-
$6.46Observed 27 October 2026, not a quote
View listing -
High-Precision UP-Grade ER Collets ER11/ER16/ER20/ER25/ER32 for Engraving Spindles
$3.49Observed 27 October 2026, not a quote
View listing -
High-Precision Spring Steel Collets for CNC Lathes 36/46/52/0640, Round, Hex, Square Hole
$8.23Observed 27 October 2026, not a quote
View listing
Want the ER8 to ER32 collets UP grade delivered? Tell us the configuration, quantity and destination and we quote it line by line, crate and freight included.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Is your workshop in United States or United Kingdom? See the guides for wholesale desktop CNC machines for United States and wholesale desktop CNC machines for United Kingdom. Taken from the Taobao listing on 27 October 2026; configurations change often. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.


