Illustrative render
Tool holding
High-Precision UP-Grade ER Collets ER11/ER16/ER20/ER25/ER32 for Engraving Spindles
$3.49¥23.29 observed on the listing, 27 October 2026. Not a quote.
We confirm the exact configuration, voltage and what is included with the seller before ordering. Single units and trial orders are fine.
What this UP grade ER collets engraving spindle listing says
Five ER series from ER11 to ER32 are covered by this listing, which tags the collets as UP grade for engraving spindles and tool holders. It sits between a narrower ER20, ER25 and ER32 UP listing and a wider ER8 to ER32 one in the same range, and costs more than the former. The UP tag and the high-precision wording remain claims until a runout reading is supplied. Bore sizes and piece counts are not shown. The observed US$3.49 (CNY 23.29) presumably prices one collet.
| Collet series | ER11, ER16, ER20, ER25, ER32 |
|---|---|
| Grade tag | UP (seller wording) |
| Use | Engraving spindles and CNC tool holders |
| Claim | High precision (no figure given) |
What we confirm with the machine seller first
- What runout does UP grade mean for this batch, and which instrument and test bar size are used to take the reading?
- Which bore sizes are listed for ER11 and ER32, and is the observed price for one collet or a full set of bores in one series?
- How much more does the UP grade cost than your standard-grade ER collets of the same series, and is the difference visible in the markings?
- Are the collets plated or oiled for shipping, and how are they packed to avoid damage to the slotted ends?
Who this machine or part suits
Useful for a CNC shop or spindle repairer needing five ER series from one supplier at UP grade, ahead of fine engraving or small-diameter milling. It is the wrong choice if you only use ER40 or ER8, which this listing does not cover.
Goods cost at the listed price
Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.
| Quantity | Goods at $3.49 each | In yuan |
|---|---|---|
| 20 | $69.80 | ¥466 |
| 100 | $349 | ¥2,329 |
| 300 | $1,047 | ¥6,987 |
Crating, seller delivery to the warehouse, our fee, international freight and import duty are added; for a machine, crating and freight can be a large part of the delivered cost.
How this price compares with other tool holding listings
Of 14 tool holding listings, this is the 10th cheapest at $3.49; the range is $1.06 to $15.40, median $2.19. Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.
Two checks that matter for ER collet orders
Treat precision grades as seller labels
UP and similar grade marks on a listing are the seller's labels. Ask for a stated run-out figure, the steel and hardening process, and whether collet and nut come as a matched pair. A quick test, clamping a gauge pin and reading run-out on a dial indicator, checks the batch, and an inspection step can be arranged before shipping.
Do not mix lathe collets with the ER series
Step collets such as 0640 and the 36/46/52 spring-steel collets usually belong to lathe or instrument-lathe systems and do not fit ER nuts. Check the spindle taper and draw method of your own machine before buying, and ask for the exact collet model and hole shape, since round, hex and square holes are separate variants.
Questions about this CNC listing
Are a tool holder and a collet chuck the same thing?
Not exactly. A tool holder is any body that carries a cutter between spindle and workpiece, and a collet chuck is one type that clamps with a collet. In these listings the BT40 holder is sold with collets, while the C32/C42 chuck is described separately, so check which collet type each body takes.
Is this the price of the complete machine?
No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.
Can I order just one unit of the UP grade ER collets engraving spindle?
For machines, usually yes: many sellers ship single units. For tooling and spare parts the seller may set a minimum per variant, which we confirm before ordering.
Similar tool holding listings
-
Taiwan High-Precision ER Collets ER8/ER11/ER16/ER20/ER25/ER32, UP
$6.44Observed 27 October 2026, not a quote
View listing -
High-Precision ER Collet Extension Holder A/M/UM Type, 8/11/16/20/25/32, for CNC Lathes
$3.02Observed 27 October 2026, not a quote
View listing -
ER11/ER16/ER20/ER25 Spindle Motor Extension Tool Shank for DIY Engraving Machines
$2.24Observed 27 October 2026, not a quote
View listing
Buying the UP grade ER collets engraving spindle for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Delivering the machine to Australia or Canada? See the guides for wholesale desktop CNC machines for Australia and wholesale desktop CNC machines for Canada. Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. A machine listing can change configuration, price or availability at any time, and specifications on it are the seller's claims until we confirm them.


