Skip to content

Tool holding

Taiwan Precision ER16, ER20, ER25 and ER32 Spring Collets, UP-Grade Collet Chuck for Machining Centres

$6.46¥43.05 observed on the listing, 27 October 2026. Not a quote.

Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.

What this ER16 ER20 ER25 ER32 spring collets listing says

Four collet series, ER16, ER20, ER25 and ER32, are covered by this listing for machining-centre tool holders, tagged UP grade and described by the seller as Taiwanese and high-precision. Its wording is close to an ER8-to-ER32 listing we also carry at almost the same price, US$6.46 against US$6.44, and the visible difference is that ER8 and ER11 are missing. The UP tag, the Taiwan origin and the precision claim are seller words with no runout figure behind them. Bore sizes, piece counts and nut type are not stated, so US$6.46 (CNY 43.05) probably prices one collet.

TypeSpring (elastic) collet
Collet seriesER16, ER20, ER25, ER32
Grade tagUP (seller wording)
Origin claimTaiwan (seller claim)
ClaimHigh precision (no runout figure)
UseMachining centres

Questions for the seller before you buy a machine

  • What evidence supports the Taiwan origin and the UP grade, such as laser markings on the collet, original packaging or a purchase invoice, and can you photograph them?
  • Which bore diameters are stocked for ER16, ER20, ER25 and ER32, and does the observed price apply to one collet at one bore?
  • What runout do you state at the collet nose and at which test length, and can a measurement sheet for a sample be supplied?
  • Are ER nuts supplied, and is each collet the plain open type or a sealed, coolant-through version?

What this listing is good for

Fits a machining-centre shop or tooling reseller that stocks ER16 to ER32 collets and wants to compare a Taiwan-claimed UP-grade line with cheaper ones, asking for runout evidence first. It is the wrong choice for ER8, ER11 or ER40 holders, which this listing does not cover.

What the listed price adds up to

This multiplies the listed price for the listed configuration. Options such as spindle power, controller or rails change the price and are confirmed first.

QuantityGoods at $6.46 eachIn yuan
20$129¥861
100$646¥4,305
300$1,938¥12,915

Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.

How this price compares with other tool holding listings

This $6.46 listing ranks 12th cheapest among 14 comparable ones, which run $1.06 to $15.40 (median $2.19). Before comparing machine prices, check that the travel, spindle and controller in each listing actually match.

Two checks that matter for ER collet orders

Match the ER series to your spindle nut

ER sizes are not interchangeable: an ER11 collet will not seat in an ER16 nut. Ask for the series that matches the nut already on your spindle, and whether the order includes the nut. Also confirm the nut style, since ER-A and ER-M types exist, and some holders ship as a body with no nut at all.

Check shank length and taper on holders

Holders and extension shanks must match the machine's spindle interface, whether a straight shank, a BT40 taper or another standard. Ask for overall length, shank diameter, taper standard and the maximum rated speed. For the BT40 and C32/C42 items, also ask whether pull studs or draw bars are included, since they may be sold separately.

All tool holding checks and listings

Buying this item: common questions

Can I order a few collet sizes from different sellers together?

Yes. We buy from several sellers in one purchase, inspect the parts at our warehouse in China and ship them in one parcel, which suits low-value parts because fixed shipping and clearance charges are shared. Ask for a count check by size and bore on arrival, since mixed small parts are easy to short-pack.

Can I buy this machine at the listed price?

Not as listed. The figure is the seller's price on 27 October 2026 at ¥6.668 to the dollar for the configuration in the listing. We confirm what is in the box, the voltage and the crate, then quote the delivered cost.

Is there a minimum order for the ER16 ER20 ER25 ER32 spring collets?

Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.

Want the ER16 ER20 ER25 ER32 spring collets delivered? Tell us the configuration, quantity and destination and we quote it line by line, crate and freight included.

Price this landed

Wholesale desktop CNC machines from China covers how small orders work. Is your workshop in Canada or Europe (EU)? See the guides for wholesale desktop CNC machines for Canada and wholesale desktop CNC machines for Europe (EU). Taken from the Taobao listing on 27 October 2026; configurations change often. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.