Skip to content
1688 CNC

Carry the Installed Linear-Guide Datum Map into the CNC Handover

A complete rail-and-block set record can still omit the builder’s installed reference arrangement. Preserve the datum role, drawing view and documented exceptions.

Linear-guide hardware behind a clear enclosure.
Linear-guide hardware behind a clear enclosure. AI-generated editorial illustration; product and workflow examples are illustrative.

An identified set of linear rails and blocks does not, by itself, explain the reference arrangement the machine builder used in the installed axis. A CNC linear guide datum handover should preserve that builder-declared arrangement in an attributable as-built drawing or equivalent record.

The buyer’s question is whether the receiving technical provider can understand the documented installed reference roles without choosing them from appearance. This review starts with the approved guide assemblies and established set associations. It is not another packing inventory, a replacement-component selection or a mounting procedure.

Separate membership from reference role

The set-association record answers which supplied components belong together. The installed datum map answers how the builder identifies their reference roles within the machine assembly. Keep those questions in separate fields even when one drawing helps answer both.

Ask for the actual axis or assembly reference, the builder’s declared master or reference-side arrangement and the as-built document that records it. An assembly list naming two guide rails may establish the supplied quantity without identifying a reference side. A carton label can preserve membership without supplying an installed orientation.

Do not create the missing map by copying a catalogue illustration. Such an illustration may explain a manufacturer’s convention, but it does not establish which arrangement the machine builder supplied. The needed document comes from the party responsible for that actual assembly.

Use manufacturer markings with their stated exceptions

THK’s LM Guide guidance describes a KB marking for the master rail and explicitly excepts normal-grade guides from that marking. It also describes reference-surface marking conventions and the possibility of specified reversed arrangements. Those qualifications matter when interpreting a record: absence of KB is not automatically a missing-mark or installation-error finding. The guidance is a THK example, not a universal convention for all guide makers. THK master-guide and reference-surface markings

Ask the provider to identify the applicable product family and marking basis, including any exception relevant to the supplied guide. Preserve the maker’s terminology in the explanation. If the provider uses “datum,” “master” and “reference side,” ask how those terms relate in its actual drawing rather than silently treating every use as identical.

A marking convention supports interpretation; it does not independently verify the machine’s as-built role or correctness. The builder still needs to connect the evidence to this installed arrangement. Purchasing should not nominate a master rail from a photograph or treat a visible mark as mounting-accuracy proof.

Make the drawing’s view unambiguous

Request the as-built drawing reference and issue, the identified axis or assembly and the view or orientation reference used by the builder. A description such as “left rail” is incomplete if the reader cannot tell which view defines left.

Where a photograph already exists, ask the provider to link it to the relevant drawing view and rail identity. A useful photo association can support the explanation, but a cropped image with no orientation reference remains ambiguous. Do not ask someone to remove guards, disturb components or expose a hidden marking merely to fill a worksheet.

Keep design intent and as-built representation distinct. If the supplier provides a generic arrangement drawing, ask whether it describes the delivered assembly and what record establishes that association. A document’s clean presentation or recent issue date does not turn it into an as-built record.

If the assembly was revised after the drawing was prepared, retain the provider’s change reference and the corrected role mapping. A later parts invoice might identify a replacement component without answering whether the builder’s reference arrangement changed.

Preserve declared special arrangements

Ask whether the supplied documented arrangement includes reversed reference surfaces or another maker-approved option relevant to the map. Request the provider’s supporting reference and its association to the exact guide assembly.

Record a special arrangement as the provider describes it, with its approval basis and limits. Do not “correct” it to resemble a standard catalogue view. Equally, a seller’s statement that the machine is special does not close an unexplained difference; it needs an attributable technical explanation.

This review preserves the declaration rather than teaching how to create or reverse an arrangement. Any future physical work remains with a separately authorized provider using the applicable machine and component documents.

Resolve a fictional complete set with no readable datum assignment

Consider a fictional machine handover whose rail-and-block records fully establish set membership. The delivery documents account for every approved guide component. However, the assembly drawing does not show the builder’s declared reference role in a view the receiving service provider can interpret.

The buyer keeps the membership question closed and requests clarification of the installed map. It identifies the exact axis and drawing issue, then asks the builder to state the reference role and orientation basis. There is no need to relabel the set as incomplete or infer that installation is wrong.

Suppose the builder supplies a clarified as-built drawing linking the declared role to the guide identity and a defined view. That can resolve the documentary orientation question. The receiving technical reviewer still determines whether the record is adequate for the intended authorized work; the drawing does not retrospectively prove mounting accuracy.

Alternatively, the builder might explain that the supplied normal-grade guides do not carry the mark the recipient expected. Keep that product qualification with the builder’s actual role declaration. A marking exception explains why a particular mark is absent; it should not be used as permission for the buyer to choose a role.

Close the map without extending its authority

The final handover should connect the machine assembly, the established guide set, the builder-declared reference role and an attributable drawing view. Preserve relevant manufacturer qualifications, special-arrangement evidence and any unresolved association.

That result is useful for a later qualified provider reviewing the machine’s records. It grants no permission to disassemble the guide, interchange components or alter its arrangement. It also makes no claim about preload, alignment or machining accuracy. Those remain separate technical questions.

Buyer document-review worksheet

This original worksheet organizes the provider’s evidence. It is not a manufacturer form or a technical work instruction. Keep the original source reference beside each answer.

FieldAnswer to obtain
Axis/assembly referenceActual machine axis and assembly identity
Guide set identityExisting approved membership record
Builder-declared reference/master roleExplicit builder declaration, not reader inference
Manufacturer marking basis and exceptionApplicable family, convention and exception
As-built drawing and viewAttributable issue and clearly defined orientation
Approved special arrangementProvider declaration and supporting maker basis
Unresolved mappingExact ambiguity and the party responsible for clarification

Bring the precise gap into the inquiry

For broader product context, see CNC linear rails. As an independent buying agent, we can coordinate supplier questions within an agreed purchasing scope. Specialist work, its availability and its approval require the responsible qualified provider.

Start a CNC quote request with a supported listing link, description or permitted product images. Arrange manuals, drawings, data files and service records through a separately authorized exchange; the form’s image field is not a technical-file upload channel.

Frequently asked questions

Does a matched linear-guide set record identify the installed datum side?

Not necessarily. Set membership and the builder-declared installed reference role answer different questions. Request the as-built map that connects the established guide identity to the actual machine assembly.

Does absence of a THK KB mark prove that the handover is wrong?

No. The cited THK guidance includes a normal-grade exception. Have the provider establish the applicable product and marking basis, then obtain the builder’s actual role declaration rather than drawing an error conclusion from the absent mark.

Can a photograph replace the linear-guide datum map?

An existing photograph can support a provider’s explanation when linked to a rail identity and defined drawing view. An ambiguous photo should remain ambiguous; procurement should not select the master or infer a correct installed arrangement from it.

What closes a reversed-reference-surface documentation gap?

An attributable provider declaration linking the arrangement to the exact assembly, its applicable maker basis and the as-built view. The record preserves the arrangement; it does not instruct anyone to reverse or remount parts.

Sources

Discuss a sourcing request related to this article.Carry the Installed Linear-Guide Datum Map into the CNC Handover

Back to articles